high humidity chamber

• EC-105HTP,MTP,MTHP, High and low temperature constant temperature bath (1000L)

  Nov 14, 2014

  EC-105HTP,MTP,MTHP, High and low temperature constant temperature bath (1000L) Project Type Series ＨＴ ＭＴ ＭＴＨ function Temperature occurs in a way Dry wet bulb method Temperature range -20 ～ + 100 ℃ -40 ～ + 100 ℃ -40 ～ + 150 ℃ Range of temperature  Below the + 100℃ ± 0.3 ℃ +Above the 101℃ ― ± 0.5 ℃ Temperature distribution Below the + 100℃ ± 1.0 ℃ Above the + 101℃ ― ± 2.0 ℃ The temperature drops the time +20 ～ -20 ℃ Within 60 minutes +20 ～ -40 ℃ Within 9 0 minutes +20 ～ -40 ℃ Within 9 0 minutes Temperature rise time -20 ～ + 100 ℃ Within 45 minutes -40 ～ + 100 ℃ Within 50 minutes -40 ～ + 150 ℃ Within 75 minutes The internal volume of the uterus was tested 1000Ｌ Test room inch method (width, depth and height) 1000mm × 1000mm × 1000mm Product inch method (width, depth and height) 1400mm × 1370mm × 1795mm Make the material External outfit Test room control panel machine room Cold steel plate, cold steel plate beige (Color table 2.5Y8 / 2) Inside Stainless steel plate (SUS304,2B polished) Broken heat material Test room Hard synthetic resin ― glass wool door Hard synthetic resin foam cotton, glass cotton Project Type Series ＨＴ ＭＴ ＭＴＨ Cooling dehumidifying device  Cooling-down method Mechanical section shrinkage mode  Cooling medium Ｒ４０４Ａ compressor Output (number of units) 0.75kW （１） 1.5kW （１） Cooling and dehumidifier Multi-channel mixed heat sink type The condenser Multi-channel mixed radiator plate type (air cooling type) Calorifier Form Nickel-chromium heat-resistant alloy heater Volume 3.5kW Blower Form Multi-channel mixed radiator plate type (air cooling type) Motor capacity 40W  Controller The temperature is set -22.0 ～ + 102.0 ℃ -42.0 ～ + 102.0 ℃ -42.0 ～ + 152.0 ℃ Humidity is set 0 ～ 98%RH （But the temperature of the wet and dry bulb is 10-85 ℃ ） Time setting Fanny 0 ~ 999 Time 59 minutes (formula) 0 ~ 20000 Time 59 minutes (formula formula) Set decomposition energy Temperature 0.1℃, humidity 1% RH for 1 min Indicate accuracy Temperature ± 0.8℃ (tp.), humidity ± 1% RH (tp.), time ± 100 PPM Vacation type Value or program Stage number 20-stage / 1 program The number of procedures The maximum number of incoming force (RAM) programs is 32 programs The maximum number of internal ROM programs is 13 programs Round-trip number  98 times maximum or unlimited Number of round-trip repeats Maximum 3 times Displace the end Pt 100Ω（at 0 ℃）， gradeＢ（JIS C 1604-1997） Control action When splitting the PID action Endovirus function Early delivery function, standby function, setting value maintenance function, power outage protection function, Power action selection function, maintenance function, transportation round-trip function, Time delivery function, time signal output function, overrising and overcooling prevention function, Abnormal representation function, external alarm output function, setting paradigm representation function, Transport type selection function, the calculation time represents the function, the slot lamp lamp function Project Type Series ＨＴ ＭＴ ＭＴＨ Control panel Equipment machine LCD operating panel (type contact panel), Represents lamp (power, transport, abnormal), test power supply terminal, external alarm terminal, Time signal output terminal, power cord connector  Protective device Refrigerating cycle Overload protection device, high blocking device Calorifier Temperature over-rise protection device, temperature fuse Blower Overload protection device Control panel Leakage breaker for power supply, fuse (for heater, humidifier), Fuse (for operating loop), temperature rise protection device (for testing), Temperature rise overcooling prevention device (test material, in microcomputer) Offproducts (sets) House receiving (4), house board (2), operation instructions (1) Equipment products Adventitia hard borosilicate glass　 270mm× 190mm ２   Cable hole 内径　 50mm １   The trough inside the lamp AC100V 15W White hot ball ２   Wheel   ４   Horizontal adjustment   ４   Electrovirus characteristics  Source *  AC　 three-phase 380V　 50Hz Maximum load current 13A 15A Capacity of the leakage breaker for the power supply 25 A Sensory current　30mA Power distribution thickness 8mm2 14mm2 Rubber insulation hose Coarseness of grounding wire 3.5mm2 5.5mm2  Tubing drain-pipe * PT1/2 Product weight 470kg 540kg

  ETIQUETAS CALIENTES : temperature and humidity controlled chamber high humidity chamber environmental control chamber climate control chamber constant humidity chamber high low temperature test chamber

  LEER MÁS